Outdoor Solar Powered Lights

Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China

The task of the present invention is accomplished by the following ways: 1, waterproof (pictured)
Through the lens cap sealing gasket, fluorescent lamp apron, cylinder sealing tape, switch sealing gasket, battery cover gasket and screws achieve a waterproof seal. among them:
(1) Lens watertight: the edge of a circle concave groove on each side of a narrow slot fastening chuck and lamp tube inner oval lamp corresponding side cover, both sides have a wide-brimmed tightening the seal Aprons lamp placed inside the edge of the slot cover, by tightening chuck, tighten the screws and reflective lampshade reaction force, the lens cap and the cap side closely to achieve watertight.
(2) watertight cap: cap lamp tube outer edge of a circle concave groove recess, the fluorescent lamp in the slot apron, the cap side cover by tightening the screws to fasten the side cover with the cap lamp tube closely to achieve watertight .
(3) Light tube seal: lamp tube is divided into two parts, with a sealing strip card in the lower edge of the concave groove, the upper fastening screw and a total of six holes on the lower part corresponds to the upper and lower engaging between, tight fixing screws, can be closely integrated lamp tube up and down between the two to achieve watertight.
(4) switch watertight:
(5) Battery cover watertight: the battery cover gasket on the upper part of the battery tube lights around the mouth of the concave groove, fasten the battery cover, tighten the screws on the upper end, so close connection between the battery cover and the cylinder to achieve watertight .
(6) screw seals: asbestos pad sets each have a screw, screw fastening screw holes will also seal. 2, lamp lighting (pictured)
A. By a semi-ellipsoidal transparent PVC material floodlights cover may be poly solar lantern beam into a divergent illumination lamp suitable light source. The narrow sides of the shade card have a protruding head, with a concave deck cover cap side corresponds to when the assembly and disassembly, first one side of the alignment plug, and then the other side a little harder to pressing inner deformed, shade the other side of the card can be loaded or unloaded deck head.

More information visit: http://www.cn-solargardenlights.com