Solar Lantern Manufacturers, Solar Light Manufacturers, Solar Lights China
Visit http://www.cn-solargardenlights.com for details
A brief overview of the special nature of solar lights
Solar street light is a typical independent photovoltaic power generation system, this is just one aspect of the problem, even more serious is that it is a reduction in the amount of solar radiation with the increased seasonal loads. You can see from the above analysis, the annual winter solstice is the minimum amount of solar radiation, which is generating the least amount of solar components, when the annual winter solstice is the shortest day, longest night, when the longest road lighting needs . Currently in the design of solar street lighting problems people are concerned about the continuous rainy days, in fact, this problem is still relatively easy to solve, as long as the increase in the capacity of the battery can be a part of, if you want the winter solstice of road lighting indicators meet the state standards requirements, unless sacrifice spring, summer, autumn generation solar cell modules, no other way. In this case the efficiency of the system will be very low.
In the solar cell power source efficiency in certain circumstances, factors that affect the use of solar street light effects, there are many: the intensity of solar radiation, the solar cell module tilt angle is reasonable, ambient temperature, battery recency (charging old battery and power generation Efficiency can be a difference of more than 30%) and the like. In the absence of these conditions previously determined to evaluate the effect of solar lights is inaccurate.
(1) "can light" does not mean that can meet the state standards CJJ45-2006. Urban road lighting design standards road illumination. Some of the case.
The output power of the light source can vary with the battery voltage, the lower the voltage, the output power is smaller, the illuminance is smaller.
2015年12月31日星期四
2015年12月27日星期日
Metal Solar Lights
Solar Lantern Manufacturers, Solar Light Manufacturers, Solar Lights China
Visit http://www.cn-solargardenlights.com for details
5.5 three-color color energy efficient light switch Speed
This issue is very important, it even determines the service life of solar lawn, up to 10-20 times the starting current three-color color energy efficient lamps started, the system in such a large withstand voltage current situation may have dropped substantially, Solar Lawn not start or start again until the damage.
5.6 boost circuit efficiency and impact of LED lights
Small power solar lawn generally boost circuit, if the oscillation circuit, inductor boost. Inductor using standard color code inductors, standard color code inductor using an open magnetic circuit, a large loss of flux, so low circuit efficiency. If a closed magnetic circuit inductor boost manufacturing, such as magnetic, boost circuit efficiency will be greatly improved. Properties close to the Zener diode LED <http://www.ledgb.com>, working voltage 0.1V, operating current may vary approximately 20mA. For security, under ordinary circumstances the use of a series current limiting resistor, great energy loss is obviously not suitable for solar lawn lights, and LED brightness varies with the operating voltage, and must automatically limit, otherwise it will damage the LED. General LED peak current 50-100mA, anti-reverse-battery or battery energy load, is likely to exceed this limit peak voltage is too high when the booster circuit, damaged LED.In recent years, China's optoelectronics industry has shown rapid growth, has formed a specialized, large-scale photovoltaic industry chain. The state supports photovoltaic building demonstration, implementation of the "Solar Roofs Plan", the financial support for the implementation of solar energy utilization policy. Photovoltaic use of solar photovoltaic power plant projects, solar street lamps and other products at a faster rate in the country is completed, production, optoelectronic products to be applied in practice. The sun light sun Technology Co., Ltd. in 2008 to get involved in the solar photovoltaic industry, the use of solar photovoltaic products research and development, utilization, it has already installed solar corridor lights, solar garden lights, solar lights, solar lawn, most of the installed project solar photovoltaic lighting systems run independently, but the installation of solar garden lights in the district, due to
Surrounding environment constraints, solar panels need to be installed separately lighting, ensure that the entire system is integrated with the building.
Visit http://www.cn-solargardenlights.com for details
5.5 three-color color energy efficient light switch Speed
This issue is very important, it even determines the service life of solar lawn, up to 10-20 times the starting current three-color color energy efficient lamps started, the system in such a large withstand voltage current situation may have dropped substantially, Solar Lawn not start or start again until the damage.
5.6 boost circuit efficiency and impact of LED lights
Small power solar lawn generally boost circuit, if the oscillation circuit, inductor boost. Inductor using standard color code inductors, standard color code inductor using an open magnetic circuit, a large loss of flux, so low circuit efficiency. If a closed magnetic circuit inductor boost manufacturing, such as magnetic, boost circuit efficiency will be greatly improved. Properties close to the Zener diode LED <http://www.ledgb.com>, working voltage 0.1V, operating current may vary approximately 20mA. For security, under ordinary circumstances the use of a series current limiting resistor, great energy loss is obviously not suitable for solar lawn lights, and LED brightness varies with the operating voltage, and must automatically limit, otherwise it will damage the LED. General LED peak current 50-100mA, anti-reverse-battery or battery energy load, is likely to exceed this limit peak voltage is too high when the booster circuit, damaged LED.In recent years, China's optoelectronics industry has shown rapid growth, has formed a specialized, large-scale photovoltaic industry chain. The state supports photovoltaic building demonstration, implementation of the "Solar Roofs Plan", the financial support for the implementation of solar energy utilization policy. Photovoltaic use of solar photovoltaic power plant projects, solar street lamps and other products at a faster rate in the country is completed, production, optoelectronic products to be applied in practice. The sun light sun Technology Co., Ltd. in 2008 to get involved in the solar photovoltaic industry, the use of solar photovoltaic products research and development, utilization, it has already installed solar corridor lights, solar garden lights, solar lights, solar lawn, most of the installed project solar photovoltaic lighting systems run independently, but the installation of solar garden lights in the district, due to
Surrounding environment constraints, solar panels need to be installed separately lighting, ensure that the entire system is integrated with the building.
2015年12月24日星期四
Solar Panels Cost
Solar Lantern Manufacturers, Solar Light Manufacturers, Solar Lights China
Visit http://www.cn-solargardenlights.com for details
For solar garden lights, from the availability, cost performance, color temperature, and luminous efficiency aspects into account, we believe that the ideal light source should now be three-color color energy efficient lamps.
LED Solar Lawn Lighting Design
1 Introduction
Solar energy as an emerging green energy, with its unparalleled advantages in the rapid popularization and application. As a fourth generation light source, in the city lighting and landscaping, road lighting, garden lighting, indoor lighting as well as lighting and other applications in various fields has been effectively utilized. Especially in remote areas without electricity, solar lighting and a more broad application prospects. Most people believe that energy-saving lamps can save energy 4/5 is a great initiative, but also energy saving lamp LED than 1/4, which is a great innovation of solid light. In addition, LED also has a high-quality light, almost no radiation, reliable and durable, very low maintenance costs and other advantages, typical of the green lighting. The successful development of ultra-bright LED, greatly reducing the cost of solar lighting, so as to achieve at or near cost-frequency AC lighting system installed early offer, and protect the environment, ease of installation, operation security, economic and energy saving.
Visit http://www.cn-solargardenlights.com for details
For solar garden lights, from the availability, cost performance, color temperature, and luminous efficiency aspects into account, we believe that the ideal light source should now be three-color color energy efficient lamps.
LED Solar Lawn Lighting Design
1 Introduction
Solar energy as an emerging green energy, with its unparalleled advantages in the rapid popularization and application. As a fourth generation light source, in the city lighting and landscaping, road lighting, garden lighting, indoor lighting as well as lighting and other applications in various fields has been effectively utilized. Especially in remote areas without electricity, solar lighting and a more broad application prospects. Most people believe that energy-saving lamps can save energy 4/5 is a great initiative, but also energy saving lamp LED than 1/4, which is a great innovation of solid light. In addition, LED also has a high-quality light, almost no radiation, reliable and durable, very low maintenance costs and other advantages, typical of the green lighting. The successful development of ultra-bright LED, greatly reducing the cost of solar lighting, so as to achieve at or near cost-frequency AC lighting system installed early offer, and protect the environment, ease of installation, operation security, economic and energy saving.
2015年12月23日星期三
Solar Lights Yard
Commercial Outdoor Lighting Manufacturers, Solar Lighting Manufacturers, Commercial Outdoor Lighting Suppliers, http://www.cn-solargardenlights.com/commercial-outdoor-lighting-manufacturers
Green, safe, reliable, stable quality, long life, easy installation and maintenance, etc., and is widely used. Solar energy as an emerging green energy, with its unparalleled advantages in Motion
Speed application, with vigorous development of solar lamps
"Green light" will become a trend. Solar LED lighting integrated
Photovoltaic cells and LED two
Advantages of "green technology" in the market quietly rising. This can be the perfect combination of the two technologies is key
Photovoltaic cells produce direct current, LED light source DC, in addition to
LED plagued with compatibility problems mains. The traditional lighting should be combined with photovoltaic cells, must be converted to alternating current, this process has increased the damage
Consumption,
Also hindered the popularity of solar lamps. Therefore, the combination of solar energy and LED solar LED lighting, in city lighting and landscaping, street lighting, indoor lighting and other lighting in various fields has been widely used.
(1) Solar LED lighting applications in city beautification lighting aspects. Solar landscape lights, solar building's exterior lights, solar lawn light, solar billboard light main use of solar energy to work. When daytime sunlight on the solar cell, the light energy into electrical energy stored in batteries, and then in the evening from the battery to landscape, the building's exterior lights, lawn, billboard light of LED provides power to work. Solar LED suitable for parks, hotels, hotel landscape lighting, landscape lighting model city streets, residential community beautification lighting green grass, park landscaping lawn ornament and a large outdoor billboard evening lighting. At present, many landscape, building exterior lighting, lawn, billboard light use LED as the light source. Due to long LED life can reach more than 100000h, low voltage, very suitable for application in solar city lighting.
(2) special lamp type according to the design requirements of the installation, the height of the lamp in the equivalent of the need to be illuminated the width of the road. Only when the side of the lighting H ≌ L; on both sides of the lighting H ≌ L / 2 where H: lamp installation height (m), L: width (m). 2. Lamp elevation (1) The elevation angle of the lamp and the light distribution curve of the lamp shall be determined. The elevation angle of each street shall be the same. (2) When the lamp holder is adjustable, make the center line of the light source fall within the L / 3-1 / 2 range of the road width. (3) on the long arm lamp (or arm lights) lamp body in the installation, the lamp side should be raised 1 mm than the pole side. (4) special lighting should be based on light distribution curve to determine the lamp elevation angle. 3. Street lamps part (1) lamps should be firmly correct, declined to loose, skew phenomenon. (2) The shade should be intact and not broken. (3) enamel lamp umbrella corrosion, deformation should be replaced. (4) light mirror mirror failure, should be replaced. 4. Light pole According to the technical parameters of battery components manufacturers, solar modules can withstand the wind pressure of 2700Pa. If the wind resistance is selected as 27m / s (equivalent to ten typhoons), according to non-viscous fluid mechanics,
2015年12月22日星期二
Landscaping Lights Solar
Development of sustainable energy and green energy from lighting such aspects, can save more power. Solar lights are widely used: the family villa, residential areas, parks and attractions, green square, urban streets, lakeside riverside, industrial enterprises, offices and schools, units garden, mountain tourism and other attractions places of decorative lighting. Solar lighting is the most economical cost-effective lighting, particularly cable wiring difficult mountainous tourist attractions most suitable solar lighting fixtures.
The system works
System works as follows: During the day, sunlight in solar panels, monocrystalline cell panel absorb the photon energy to produce electricity later. In the case of lighting, the voltage is substantially constant, the current strength as the light intensity changes, the stronger the light the current increases. Power generation is stored in the battery via charger, controlled by the microcontroller detection circuit detects it control charge and discharge.
3 solar street light design 3.1 use the environment to locate the streets and park area lighting use. 3.2 modeling positioning As the modern city of people, busy working very little to the wild close to nature, feel the green life, so how can the city people, in the busy at the same time can enjoy the natural atmosphere, become the key to this design, It is necessary to ensure that its structure meets the equipment space required for the part. Structural design and can resist the damage caused by the external environment, based on the above factors, the design of solar LED lights on the bionic design, the plant leaves from the shape of the Lenovo design, because the photosynthesis of leaves through the leaves to maintain the entire life cycle, Solar LED lights also absorb energy through the absorption of energy to achieve the role of the entire lighting, to the busy people bring new ideas and fun. So that the street can also become a people in the eyes of a landscape. 3.3 ergonomic analysis 1. Lamp height (1) lamp installation height, the same street lighting installation height must be consistent, that is, the light center to the ground height.
2015年12月21日星期一
Outdoor Garden Lights
Solar LED Lighting Manufacturers, Solar Lighting Manufacturers,Solar LED Lighting Manufacturer, http://www.cn-solargardenlights.com
The following figure is the basis I have on an ordinary lawn functionally optimized simple diagram; that is charged with a variety of equipment for use in its internal data lines, in order to achieve the effect of the emergency charge.
Solar Lawn Application Prospect
Solar lawn style is simple, there is no long cable, there is a battery inside, absorb sunlight during the day in reserve, whenever it will be lit at dusk lighting, a soft light, general can continue 8h. Many urban parks are in the lawn as the protagonist, become leisure and entertainment best place; in addition, villa lawn area is also very large. Solar Lawn mainly used for urban lawns, including squares, parks, residential, roads and other green spaces. Accelerate and improve the level of urban green urbanization process, stimulated the development of production and research of lawn.
China's solar energy industry has developed rapidly, the domestic market for solar energy products, the size of the potential demand is very huge. In recent years, solar lawn due to its energy saving, environmental protection, ease of installation, which is widely used in home and abroad, although the application of our products has not completely universal, but its huge potential demand. With further increase of urban green areas, the domestic market will further increase the demand for the supply of solar lawn.
As can be seen, solar lawn as a new energy-saving lamps, its special features and practical with our lives, the next period of time will also be a blowout era solar applications.
solar street lights should be more attention than the traditional street lamp design, As the solar panels of large area, have a certain weight, so the design of the overall shape of the bracket, not too large, but also consider the wind problem, the welding site should be strong [9]. 2.3 classification of solar street light The type of solar street is very much, the shape of ever-changing, more diverse functions, so there is no uniform classification of a standard, people can according to the actual needs of the classification of lamps, the main categories are: 1) Location lights are 0.3-1.2m high, mainly used to illuminate plants, create an atmosphere or narrow sidewalks, from the lighting guide, see Figure 2-3.
2015年12月15日星期二
Led Lights Solar Powered
Towards the long road tunnel length of 824 m garden, test project using LED illumination, according to the basic configuration of the tunnel lighting segment. Lighting inside the tunnel by the solar photovoltaic power system and oil machine in a complementary manner to resolve, mainly by solar phalanx, battery, power regulators, brackets, etc., in order to improve the reliability of the system, the configuration of diesel generators as ancillary equipment use.
Solar power system design will be a long road towards the actual situation Garden tunnel lighting project (geography, weather and load conditions), at first ensure the system is safe, reliable and able to meet the normal load the premise that each part of the system design capacity achieve a reasonable configuration.
Through the tunnel dimming facilities related research, with reference to domestic dimmer facility design concept, based on highway tunnel lighting design specifications for the long road towards the tunnel relying garden project has been designed, in order to speed up the progress of the project, in the small cap Ridge tunnel implementation .
Small cap Tunnel dimming and lighting effects inside the tunnel
Left small cap Tunnel dimming facilities. Program uses the setting sun roof, light leakage through the side entrance to resolve the brightness gradient. After the implementation of small-Tunnel, the dimming effect is not ideal, the dimming effect is not reached.
Both sides of the long road toward both tunnel entrance garden corners, not suitable for dimming system implementation, so this test project does not conduct dimming system implementation, and with reference to Fuxing Road East Tunnel dimming segment design, to support projects dimming facilities make improvements for the future application of other project basis.
(1) light room: lamp room mainly refers to the closure of the light source of the shell, but in addition to light, the lamp room design to take into account whether to put down the relevant parts of the space, but also take into account whether the lamp room is strong enough To achieve the level of sealing, to prevent the destruction of the outside world. (2) light pole: the design of solar street poles should be taken into account when the light pole material, outdoor solar street light material selection to durable, beautiful. As the height of the light source are different, according to the purpose of use, separately design lamp bracket. When the purpose of lighting is to be able to illuminate the ground evenly, so that pedestrians can be more secure and comprehensive identification of the road when the situation can be used high-point light source is the stent center of gravity.
Solar Lighting Manufacturer, Solar LED Lighting Manufacturers,Solar Lighting Suppliers, www.cn-solargardenlights.com
2015年12月14日星期一
Solar Led Lights Garden
Solar Lighting Manufacturer, Solar LED Lighting Manufacturers,Solar Lighting Suppliers, www.cn-solargardenlights.com
3. Status of photovoltaic power research
Research on the photovoltaic power system including the related development of solar cells, inverters, controllers and so on. In recent years, research has focused on the solar cell solar cell materials research and localization of its research institutes, mainly in universities and research institutes, such as the Beijing Solar Energy Research Institute, Ministry of Information Industry No. 18 Research Institute, Shanghai 811 Institute, Institute of Semiconductors , Shanghai Jiaotong University, Sichuan University, and so on.
Since 2005, the photovoltaic industry, the rapid development, quality and production increased rapidly, in 2008 PV module output ranks first in the world, with the development of thin film solar cells and silicon material solutions, the rapid decline in prices, created favorable for large-scale applications condition. Research and development capabilities of domestic enterprises increased rapidly, more than alone or in Combination mode to establish a research center [1].
Solar cells are an important part of photovoltaic power generation system, the package material EVA film PVF composite film modified, screen printing paste localization and other research have been carried out. With the gradual maturity of the solar cell, with the support of storage products - battery development is also beginning to attract attention, but the market still lacks full battery products meet the following requirements:
Strong resistance to overcharge and over discharge capacity;
As high energy density;
Maintenance is simple, no water;
No mist overflow, without isolating place;
Figure 2-2 Structure of solar LED street light 1. Solar panels Solar cells are made of semiconductor materials, these materials are mainly crystalline silicon. At present, solar cells have monocrystalline silicon battery, polysilicon battery, amorphous silicon thin film solar cells. 2. Light source in the choice of light source often need to take into account the high light efficiency, energy saving, because the solar panel light conversion rate is limited, and in the case of continuous rainfall is often continued, the use of energy-saving light source is the key. 3. Battery battery is the power source of solar lights, in the choice of solar street lights when the battery, to consider the life of solar cells, storage capacity and battery size. 4. Lighthouse structure Lighthouse is the focus of solar street design, because the structure of the lighthouse is very important, it is necessary to express the style of lighting, but also bear all the other parts of a reasonable allocation in one role. Lighthouse, including lamp and poles two parts.
2015年12月13日星期日
Solar Led Lights Garden
Visit http://www.cn-solargardenlights.com for details
3. Status of photovoltaic power research
Research on the photovoltaic power system including the related development of solar cells, inverters, controllers and so on. In recent years, research has focused on the solar cell solar cell materials research and localization of its research institutes, mainly in universities and research institutes, such as the Beijing Solar Energy Research Institute, Ministry of Information Industry No. 18 Research Institute, Shanghai 811 Institute, Institute of Semiconductors , Shanghai Jiaotong University, Sichuan University, and so on.
Since 2005, the photovoltaic industry, the rapid development, quality and production increased rapidly, in 2008 PV module output ranks first in the world, with the development of thin film solar cells and silicon material solutions, the rapid decline in prices, created favorable for large-scale applications condition. Research and development capabilities of domestic enterprises increased rapidly, more than alone or in Combination mode to establish a research center [1].
Solar cells are an important part of photovoltaic power generation system, the package material EVA film PVF composite film modified, screen printing paste localization and other research have been carried out. With the gradual maturity of the solar cell, with the support of storage products - battery development is also beginning to attract attention, but the market still lacks full battery products meet the following requirements:
Strong resistance to overcharge and over discharge capacity;
As high energy density;
Maintenance is simple, no water;
No mist overflow, without isolating place;
3. Status of photovoltaic power research
Research on the photovoltaic power system including the related development of solar cells, inverters, controllers and so on. In recent years, research has focused on the solar cell solar cell materials research and localization of its research institutes, mainly in universities and research institutes, such as the Beijing Solar Energy Research Institute, Ministry of Information Industry No. 18 Research Institute, Shanghai 811 Institute, Institute of Semiconductors , Shanghai Jiaotong University, Sichuan University, and so on.
Since 2005, the photovoltaic industry, the rapid development, quality and production increased rapidly, in 2008 PV module output ranks first in the world, with the development of thin film solar cells and silicon material solutions, the rapid decline in prices, created favorable for large-scale applications condition. Research and development capabilities of domestic enterprises increased rapidly, more than alone or in Combination mode to establish a research center [1].
Solar cells are an important part of photovoltaic power generation system, the package material EVA film PVF composite film modified, screen printing paste localization and other research have been carried out. With the gradual maturity of the solar cell, with the support of storage products - battery development is also beginning to attract attention, but the market still lacks full battery products meet the following requirements:
Strong resistance to overcharge and over discharge capacity;
As high energy density;
Maintenance is simple, no water;
No mist overflow, without isolating place;
2015年12月8日星期二
Solar Tree Lights Outdoor
Commercial Outdoor Lighting Manufacturer, Solar LED Lighting Manufacturers, Outdoor Lighting Manufacturers
Visit http://www.cn-solargardenlights.com for detailsUse of solar photovoltaic technology in manufacturing new solar lighting is the center of the recent period in terms of civilian high-tech aspects of the important work to promote the application of photovoltaic systems and technology, but also the implementation of a national party and building a conservation-oriented society strategy guiding ideology of important initiatives. Recently, China's electricity consumption for lighting by more than 12% of the country's total electricity consumption, an annual increase of all kinds of street 50 million, if, of which 1% of the use of solar lights, that will add 700 million of the country to save electricity , equivalent to an annual consumption to the country a no no 100 000 KW of power plant of any contamination. At the same time, the new high-tech product output value of 5 billion yuan, profit and tax of 1.5 billion, related industries tens of billions,
Added related nearly ten thousand jobs.
Third, the technical analysis
Solar lighting including solar lights, solar garden lights, solar lawn lights, solar corridor lights. Suitable for all needs
To lighting.
The basic principle: to absorb natural sunlight radiation energy from the solar panels, when required by the high-tech lighting system suitable for the control device can be used to store or converted directly to electricity luminous body, for direct illumination, either. Therefore, safe and reliable, no noise, no pollution, energy widely available without geographical restrictions, no consumption of fuel, no mechanical moving parts, low failure rate, easy maintenance and so on. Use, each lamp solar lights are quite and have a separate power supply, can be placed anywhere without power design, no electricity capacity, without manual power control, without trenching pipe, without laying cable wires, easy to install, such as the case road reconstruction, moving more convenient location.
2015年12月7日星期一
Solar Garden Lights Cheap
Commercial Outdoor Lighting Manufacturers, Solar Lighting Manufacturers, Commercial Outdoor Lighting Suppliers,
Dalian area is semi-humid warm temperate monsoon climate of both the maritime climate. Dalian in the northern hemisphere mid-latitude areas, suffered relatively large solar radiation throughout the year, with westerly atmospheric circulation and subtropical system based, together with the mountain on one side, the sea on three sides of the geographical environment impact, so the climate characteristics of the area is : four seasons, mild climate, the air is moist, concentrated rainfall, monsoon Obviously, the larger the wind. The annual average temperature is 8-11 ℃, from south to north reduced the warmest areas in Northeast China. August the hottest (July and August is the peak tourist season Dalian), the coldest January. Annual rainfall of 550-1000 mm, increasing from southwest to northeast. Precipitation center is located in the mountains of northern Zhuanghe City. Uneven distribution of precipitation in four seasons, 60-70% of rainfall concentrated in the summer (July and August). The area is in the range of the East Asian monsoon, summer prevailing southerly winds, winter prevails
Northerly winds, the annual average wind speed of 3-6 m / s wind speed in Northeast China is one of the larger areas.
Spring climate characteristics: dry and dry, warmer faster. Spring warm air comes alive, the cold air gradually weakened, warmer temperatures rapidly. In late February to early April, the snow changed rain, seasonal precipitation is 75-115 mm, accounting for slightly more than 10% of annual precipitation. Due to less precipitation, evaporation, and easy
Causing the drought.
Summer climate: humid and rainy, high temperatures. The average temperature in summer months in most areas above 20 ℃, in August the hottest (about 29 degrees). Rainy weather this season, concentrated rainfall, seasonal precipitation is 350-550 mm, accounting for 60-70% of annual precipitation, prone to localized flooding, drought prone individual years. In mid-July - late August, an average of 1-2 times tropical cyclones each year, with the impact of tropical cyclones.
Visit http://www.cn-solargardenlights.com for details
2015年11月10日星期二
Discount Solar Lights
2. Policy support bottleneck despite China's "Renewable Energy Law" already in the January 1, 2006 came into effect. Act made it clear that "The state encourages units and individuals to install and use solar photovoltaic systems and other solar energy utilization system," also has in principle to the provisions of the "national government set up special funds for renewable energy development", "financial institutions can provide financial discount preferential loans "and other incentives, but the corresponding measures workable, such as the" Tariff Act "delay in the introduction, so that solar photovoltaic power generation plan proposed demonstration projects around mostly, from the market-oriented large-scale promotion It is still very far away. The company currently only accept wind power and biomass power generation. "Tariff Act" to legislation in the form of renewable energy "potential market" to "market reality", renewable energy generation, without the high cost of electricity due to a competitive technology, has become a market the competitiveness of industry, the introduction of market mechanisms, help promote the rapid development, rapid reduce costs and create a virtuous circle, and ultimately achieving sustainable energy development.
3. The cost is still too high to limit the domestic application of the main problem is the high cost of solar power. Solar power currently costs about 3.5 yuan per kilowatt, and biomass power generation (biogas power generation), wind power, hydropower and really expensive compared to conventional coal, which restricts the Chinese solar market growth. Yingli is currently more than 90 percent of products exported to foreign countries, fewer than l0% in the country, mainly used in communications base stations, Northwest households with systems and highway traffic warning lights.
2015年11月4日星期三
Solar External Lights
Visit www.cn-solargardenlights.com for details
Solar air conditioning window is now in a leading position at home and abroad, within the effective patent protection, it is difficult not infringe the patent on the basis of the basic structure of outstanding products appear. Even if there is the outstanding new products in a particular field, we can bring to the upgrading of the product. Meanwhile, the company has organized a strong R & D team, and actively develop research to enhance the performance of the product, a breakthrough has been made, the second generation of products has been studied and applied for over patent stereotypes. Therefore, the products in technology leadership substantially no risks. Fourth, the economic and social benefits of solar air conditioning window analysis
(A) Economic Benefit Analysis
Through the window of the solar air conditioning market requirements, analysis of competitive products and solar lights policy, the next three years, sales of solar lights will gradually enter the phase of rapid growth, market share gradually developed to 30-40%. Our sales of technology products mainly include three major components, namely: the use of door and window factory technical training and provinces proxy initial fee; profit commission supporting the supply of raw materials; some raw materials produce their own profits and doors windows and doors processing training base product profitability. The next three years of profit indicators are as follows:
2007 500 transfer technology promotion, sales of raw materials 1,000 tons, the production of doors and windows 20,000 square meters, with a total profit of 6.8 million yuan.
2008 to promote the transfer of technology 2000, sales of raw materials 2,500 tons, the production of doors and windows 20,000 square meters, with a total profit of 23 million yuan.
2015年10月30日星期五
Solar Lights Outdoor Garden
Visit www.cn-solargardenlights.com for details
Under China's solar thermal industry both product technology or production capacity, is unique, not only because of the specificity of the vacuum energy, also outside no introduction, within no reference to the case, independent of solar products to create a complete industrial system , the world's large-scale, standardized production foundation.
As consumers in the world in different countries and regions have a solar water heater for different consumption habits, but also because of the different parts of water, different water supply, different structures, different national standards and different customs and culture, etc., to form a world of solar water heater products many individual needs. If you can meet the needs of these differences, it is necessary to have a strong support and the ability of independent innovation of technology, such as sun, rain, has developed a suitable East Asia, Europe, North America, South America, Australia and the Middle East as well as the new collector devices, products have been exported to over 80 countries and regions in the world, here are some solar companies in the United States and Europe appears to be impossible.
UN Secretary-General Ban Ki-moon coincided with the United Nations Climate Change Conference held in Bali, Indonesia on the occasion of a speech pointed out that the world should be open to "green economy era," the door to establish a global framework for coordinating the global response to climate change forces, noting that China has become the country on the use of the world's leading solar energy and wind energy.
In addition, the United Nations is prepared to launch a promotion of solar lantern in the developing plan, Energy Department officials examined the solar thermal industry in many countries, came to China in 2007, after a study they had to say, "To promote solar energy in the world water heaters, China is the only possible model. " These are enough to show that the status of China's solar thermal industry in the world to any other country can not be surpassed. From one side to see the Chinese solar position in the world.
2015年10月29日星期四
Solar Shop Lights
Visit www.cn-solargardenlights.com for details
With worldwide energy shortage situation worsening, the world also in the unprecedented adjustment with respect to the development of solar, wind and other renewable energy sources pace, the introduction of a wide range of policy measures to encourage and promote the accelerated development of renewable energy industry . With Suntech, Yingli, Jiangxi LDK and a number of Chinese solar companies have landed in the international capital market, China's solar PV industry has become the world's renewable energy sector in a decisive part. Relatively speaking, the Chinese solar thermal industry so far not a listed company in the true sense, but it did not affect China's solar thermal industry in the international market, "blockbuster" status. Since 2007, with successive operations, "Jiangsu Sun Rain" Spanish joint ventures and Korean-owned companies, international solar photovoltaic field already formed a "Suntech" take the lead, light and heat to the "Solar Rain" leader in the international market competition, good situation, and jointly promote the progress and development of product technology and application technology.
International solar thermal market
Although China is the world's solar water heater to maintain the maximum amount of the country, but per capita ownership still far behind in Israel and other countries, the Chinese market has become the international market it is an integral and important part;
From the maturity of the consumer point of view, Europe is still the largest consumer of solar lantern, but the United States, Canada, Mexico, as the representative of the North American market to South Africa and other countries on behalf of the African market, with Turkey, Syria and other Middle Eastern countries as the representative of the Middle East market is booming;
From product application point of view, Europe, Australia and other developed regions represented, because of its own awareness and the use of solar lantern are relatively mature product, with its own characteristics and construction spending habits, mostly confined system products, while demand for products like the Middle East, South Africa, India and other areas closer to China's market conditions, mainly in non-pressure systems。
2015年10月28日星期三
Solar Lighting Outdoors
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
Visit www.cn-solargardenlights.com for details
The exhibition was held in Nanjing, eastern China will greatly facilitate and neighboring provinces of solar engineering market and channel marketing .3 huge market potential, early this year, most of the country continued ultra-low temperature, the South not to become a hot topic of heating, energy-saving, environmentally-friendly form of solar heating is also of concern. Currently, seven provinces and one city in East China most areas do not belong to the state to establish uniform heating area, and increase aid to the solar energy household Heating in the form of a huge potential market in East China. East is China's important industrial and agricultural production areas, the demand for heat (hot water) is very large, if conventional energy heating, will not be conducive to environmental protection and reduce haze concentration, solar hot water system can not only replace conventional energy use, but also to protect the environment, clean air and make a positive contribution. In recent years, solar thermal engineering market is increasing rapidly, Jiangsu, Shandong, Anhui, Zhejiang, Henan and other provinces engineering market continued to rise, and the huge potential, the China International Fair in Nanjing organized too, will help the solar project market to new highs. "It is understood, Jiangsu Province Construction Association Solar Energy Professional Committee of Jiangsu Renewable Energy Industry Association, Jiangsu Solar Energy Research Association Professional Committee of the province will work as a co-sponsor of the General Assembly. New Exhibition Highlights
Early development of solar thermal industry, most companies focus on developing solar thermal utilization and upgrading the retail sales channel retail market, so the first 10 session of the exhibition is mainly focused on science and market channels for enterprises to build a platform for investment dealers. Today, the engineering market is booming, this year the situation is particularly evident in the solar thermal industry ushered in the transformation and upgrading of many enterprises in technology transformation, product transformation, marketing transformation aspects go hand in hand. Market development projects, solar thermal companies is no longer only a conventional solar water heater products they need for solar water heating system is equipped with an air-source heat pump, gas boiler (boiler), electric heating in the project for the auxiliary energy products and technologies.
Visit www.cn-solargardenlights.com for details
The exhibition was held in Nanjing, eastern China will greatly facilitate and neighboring provinces of solar engineering market and channel marketing .3 huge market potential, early this year, most of the country continued ultra-low temperature, the South not to become a hot topic of heating, energy-saving, environmentally-friendly form of solar heating is also of concern. Currently, seven provinces and one city in East China most areas do not belong to the state to establish uniform heating area, and increase aid to the solar energy household Heating in the form of a huge potential market in East China. East is China's important industrial and agricultural production areas, the demand for heat (hot water) is very large, if conventional energy heating, will not be conducive to environmental protection and reduce haze concentration, solar hot water system can not only replace conventional energy use, but also to protect the environment, clean air and make a positive contribution. In recent years, solar thermal engineering market is increasing rapidly, Jiangsu, Shandong, Anhui, Zhejiang, Henan and other provinces engineering market continued to rise, and the huge potential, the China International Fair in Nanjing organized too, will help the solar project market to new highs. "It is understood, Jiangsu Province Construction Association Solar Energy Professional Committee of Jiangsu Renewable Energy Industry Association, Jiangsu Solar Energy Research Association Professional Committee of the province will work as a co-sponsor of the General Assembly. New Exhibition Highlights
Early development of solar thermal industry, most companies focus on developing solar thermal utilization and upgrading the retail sales channel retail market, so the first 10 session of the exhibition is mainly focused on science and market channels for enterprises to build a platform for investment dealers. Today, the engineering market is booming, this year the situation is particularly evident in the solar thermal industry ushered in the transformation and upgrading of many enterprises in technology transformation, product transformation, marketing transformation aspects go hand in hand. Market development projects, solar thermal companies is no longer only a conventional solar water heater products they need for solar water heating system is equipped with an air-source heat pump, gas boiler (boiler), electric heating in the project for the auxiliary energy products and technologies.
2015年10月27日星期二
Solar Lamp Outdoor
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
Visit www.cn-solargardenlights.com for details
4,:Preparation(including battery plate production,circuit board production and other accessories forTaiwan,inspection work,cleaning circuit board,product assembly,testing,appearance,seized goods,packaging,quality inspection,storage.Throughout the development of the world solar photovoltaic industry,we should say thatwe must rely on government policy to promote the development of new energy industry inChina.We know that,to date,the United States,Japan,Germany,Spain,Holland,Portugal,India and other countries have begun to implement policies to promote newenergy development.Law has also been introduced,which is more than the previous 1years ago,the bill is a German new energy laws and regulations for the reference,sothat we can expect,the formal implementation of the law will be the gradual developmentof the photovoltaic industry.We know that,although the development of modern industryin a large extent depends on the conventional mineral energy,but the exploitation andconsumption,not only to bring pollution to our living environment,but also throughscientific research,the past one hundred years,the development of coal,oil,naturalgas and other fossil fuels have been unable to sustain the development of human beingsfor 100 years!Therefore,the development of new energy,the protection of the earthenvironment is increasingly concerned by human beings.In 2000,the world and China'ssolar energy and conventional energy continued to use the year.Thus,the world energysituation is very grim,China is the case,and the advantage of solar energy is clear.All two,so both the United Nations Organization,or the state,enterprises andindividuals,everyone in the discussion of sustainable human development,or moreserious,sustainable existence.We will look first focused on energy and theenvironment.It can be said,who quickly solve the two major problems,who will be inthe next century ahead of other countries or organizations.Therefore,since the lastcentury 80 time metaphase begins,development and utilization of renewable energy in theworld gradually formed a shares a torrent,especially solar power,the developmentmomentum has been far more than other industries.All this shows that this is a trend ofthe world,can not be Barrier,3.1.2,composition and analysis of photovoltaic industrychainPhotovoltaic industry chain can be divided into 5 levels,each level can beoperated independently,but also can coordinate the development.But from the world,thecompany has a full range of products has not yet produced.1,solar grade silicon rawmaterial production.
Visit www.cn-solargardenlights.com for details
4,:Preparation(including battery plate production,circuit board production and other accessories forTaiwan,inspection work,cleaning circuit board,product assembly,testing,appearance,seized goods,packaging,quality inspection,storage.Throughout the development of the world solar photovoltaic industry,we should say thatwe must rely on government policy to promote the development of new energy industry inChina.We know that,to date,the United States,Japan,Germany,Spain,Holland,Portugal,India and other countries have begun to implement policies to promote newenergy development.Law has also been introduced,which is more than the previous 1years ago,the bill is a German new energy laws and regulations for the reference,sothat we can expect,the formal implementation of the law will be the gradual developmentof the photovoltaic industry.We know that,although the development of modern industryin a large extent depends on the conventional mineral energy,but the exploitation andconsumption,not only to bring pollution to our living environment,but also throughscientific research,the past one hundred years,the development of coal,oil,naturalgas and other fossil fuels have been unable to sustain the development of human beingsfor 100 years!Therefore,the development of new energy,the protection of the earthenvironment is increasingly concerned by human beings.In 2000,the world and China'ssolar energy and conventional energy continued to use the year.Thus,the world energysituation is very grim,China is the case,and the advantage of solar energy is clear.All two,so both the United Nations Organization,or the state,enterprises andindividuals,everyone in the discussion of sustainable human development,or moreserious,sustainable existence.We will look first focused on energy and theenvironment.It can be said,who quickly solve the two major problems,who will be inthe next century ahead of other countries or organizations.Therefore,since the lastcentury 80 time metaphase begins,development and utilization of renewable energy in theworld gradually formed a shares a torrent,especially solar power,the developmentmomentum has been far more than other industries.All this shows that this is a trend ofthe world,can not be Barrier,3.1.2,composition and analysis of photovoltaic industrychainPhotovoltaic industry chain can be divided into 5 levels,each level can beoperated independently,but also can coordinate the development.But from the world,thecompany has a full range of products has not yet produced.1,solar grade silicon rawmaterial production.
2015年10月26日星期一
Solar Powered Lamps Outdoor
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
Visit www.cn-solargardenlights.com for details
Four,the principle of solar energy automatic lamp productsWill be more widerfrequency+born with it first to use solar panels to convert the sun's light isdirectly converted into electric energy to provide energy to the equipment of daily use,and the use of insect phototaxis,chemotactic waves,color trend of physiologicalstructure,supplemented with a specific light source and 365 nm wavelength wasdeveloped.Using spectral technology breaks through the traditional insecticidal lampusing a single light band limited,the effective range of wavelengths,trapping andkilling pest species and quantity.Night pest killing lamp special lighting andwavelength of the attraction will be desperate to rush toward to come over,and in thelight of periphery has a layer of 3000-5000 volt high-voltage power grid,insects tofly In the process of lighting electric shock,so as to achieve a good insecticidaleffect.Five,the application range of the solar energy automatic lampProducts are widelyused in agriculture,animal husbandry and fisheries,farms,vineyards,citrus orchard,waxberry plantation.Litchi orchard,apple orchard,mango orchards and other types oforchards,vegetable base,tea plantation,organic rice,sugarcane,tobacco,peanuts,cotton,flowers,forest,urban greening,parks need a pest control,pest killer,is ahigh-tech pollution-free physical deinsectization device.Six,automatic solarinsecticidal lamp trapping pestsCan trap and kill the underground pests,pest of wheatand barley,rice pests,pests of cotton,grains pests,pests of vegetables,storagepests,pest of fruit trees,forest pests,grassland pests,tea pests and so on.Potatotuber moth,and moth,mole cricket;Insect pests of rice:rice borer,rice leafhopper,rice stem borer,Chilo suppressalis,rice planthopper,rice leaffolder;Cotton:cottonbollworm,tobacco budworm,pink bollworm,selenaria,fleahopper;Pest:sudden back spotred bug,moth,moth,sucking moth,Dichocrocis punctiferalis;Forest pests:Americanwhite moth moth,willow tussock moth,Dendrolimus punctatus,Monochamus alternatus,handle longicorn beetle,Anoplophora glabripennis,Biston betularia,leaf rollers,Apocheima cinerarius,poplar white moth,cicadella viridis;Michael:cerealella,insectpests;Grain pests:sorghum borer,corn borer,soybean pod borer,beans Tiane,milletborer moth,when Apple orange;Underground pest:tiger,tobacco budworm,beetles,mayflies;Grassland pests:oedaleusasiaticus,meadow moth,leaf beetle;Storage pests:tenebroides mauritanicus,Dell pirates,cerealella,flour beetles,Stegobium,rice moth,weevil,136 main beetles and other pests.Seven,the function of solar energy automaticlamp products1,frequency vibration control technology2,trap light:frequency lamp(wavelength 320~600 m optional).3:more than 0.16 square meters,the impact area.4,the power grid over current short circuit protection.
Visit www.cn-solargardenlights.com for details
Four,the principle of solar energy automatic lamp productsWill be more widerfrequency+born with it first to use solar panels to convert the sun's light isdirectly converted into electric energy to provide energy to the equipment of daily use,and the use of insect phototaxis,chemotactic waves,color trend of physiologicalstructure,supplemented with a specific light source and 365 nm wavelength wasdeveloped.Using spectral technology breaks through the traditional insecticidal lampusing a single light band limited,the effective range of wavelengths,trapping andkilling pest species and quantity.Night pest killing lamp special lighting andwavelength of the attraction will be desperate to rush toward to come over,and in thelight of periphery has a layer of 3000-5000 volt high-voltage power grid,insects tofly In the process of lighting electric shock,so as to achieve a good insecticidaleffect.Five,the application range of the solar energy automatic lampProducts are widelyused in agriculture,animal husbandry and fisheries,farms,vineyards,citrus orchard,waxberry plantation.Litchi orchard,apple orchard,mango orchards and other types oforchards,vegetable base,tea plantation,organic rice,sugarcane,tobacco,peanuts,cotton,flowers,forest,urban greening,parks need a pest control,pest killer,is ahigh-tech pollution-free physical deinsectization device.Six,automatic solarinsecticidal lamp trapping pestsCan trap and kill the underground pests,pest of wheatand barley,rice pests,pests of cotton,grains pests,pests of vegetables,storagepests,pest of fruit trees,forest pests,grassland pests,tea pests and so on.Potatotuber moth,and moth,mole cricket;Insect pests of rice:rice borer,rice leafhopper,rice stem borer,Chilo suppressalis,rice planthopper,rice leaffolder;Cotton:cottonbollworm,tobacco budworm,pink bollworm,selenaria,fleahopper;Pest:sudden back spotred bug,moth,moth,sucking moth,Dichocrocis punctiferalis;Forest pests:Americanwhite moth moth,willow tussock moth,Dendrolimus punctatus,Monochamus alternatus,handle longicorn beetle,Anoplophora glabripennis,Biston betularia,leaf rollers,Apocheima cinerarius,poplar white moth,cicadella viridis;Michael:cerealella,insectpests;Grain pests:sorghum borer,corn borer,soybean pod borer,beans Tiane,milletborer moth,when Apple orange;Underground pest:tiger,tobacco budworm,beetles,mayflies;Grassland pests:oedaleusasiaticus,meadow moth,leaf beetle;Storage pests:tenebroides mauritanicus,Dell pirates,cerealella,flour beetles,Stegobium,rice moth,weevil,136 main beetles and other pests.Seven,the function of solar energy automaticlamp products1,frequency vibration control technology2,trap light:frequency lamp(wavelength 320~600 m optional).3:more than 0.16 square meters,the impact area.4,the power grid over current short circuit protection.
Solar Light Bulbs For Outside
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
Visit: www.cn-solargardenlights.com for details
3,after the boot,whenthe long press ON/OFF button:LED can be lit,can be used for you in the light of thelack of light or dark lighting,the use of small,the machine can be more than 100hours;again press ON/OFF button,the machine is powered off.Three,product features:1,MCU control,intelligent design,safe and reliable,with over charge protection,overdischarge protection,over current protection,short circuit protection2,especiallysuitable for emergency situationsWhen you work or travel in the wild,or encountered apower outage,intelligent solar mobile power will help your busy,make your phoneanytime,anywhere to keep working state,to keep you in touch with other people.3,Whenever and wherever you can,you can be very convenient to charge or charge yourmobile phone or other digital products;4,high efficiency chargingEfficient and fast,just give your phone or other digital products charge 60 minutes,you can get up to 100-150 minutes of use time;5,environmental protection,energy savingUse of green energy,solar energy,and jointly contribute to environmental protection;6,the appearance offashion,easy to carryInnovative design concept,slim aluminum alloy shell design,avariety of colors,beautiful fashion,easy to carry.7,there are multiple differentvoltage optionsOutput voltage are:4.8V,5.8V,8.4V,9V is generally 4.8V,the scope ofapplication is wider.8,with lightsWith high brightness LED,can reach more than 100hours long lighting,convenient for the night and emergency use.Four,productperformance and parameters:Solar panel peak power:1.6WSolar panel voltage:5.5VInputinterface:DC interfaceOutput interface:5P USB interfacePolymer lithium batterycapacity:4200mAhWorking temperature:-10--65Solar charging time:14-20 hours(sunlight intensity:m2/1000W)Solar charge current:230mA-300mA(solar light intensity:m2/1000W)External input DC voltage:4.8V-7.5V+0.5VExternal DC input current:900mA-1200mA(1A)External DC power charge time:3.5-5.5 hoursAdjustable output voltage:5.8V/DC4.8V/8.4V/9.0V(+0.2V)Output current:400mA800mA(0.8A)Low power tip:when thebattery is not enough,LED red light flashing prompt charging.Five,note:1,please usethe original adapter and wire,in order to achieve the best results.2,please do not usesharp objects to scrape the surface of the solar panel.3,do not go beyond the use ofvoltage range charge or power supply,so as to avoid damage to the products andperipherals.4,avoid placing the high temperature(>70 degrees),humidity and corrosiveenvironment,do not use in the vicinity of the fire source.5,after the short circuitprotection,plug in the charger 10 seconds or strong sunlight can restore the output.Manual for the use of solar energy automatic lamp productsAutomatic solar insecticidallamps using solar power technology and pest phototaxis design research and development,which is mainly TPSC3.
Visit: www.cn-solargardenlights.com for details
3,after the boot,whenthe long press ON/OFF button:LED can be lit,can be used for you in the light of thelack of light or dark lighting,the use of small,the machine can be more than 100hours;again press ON/OFF button,the machine is powered off.Three,product features:1,MCU control,intelligent design,safe and reliable,with over charge protection,overdischarge protection,over current protection,short circuit protection2,especiallysuitable for emergency situationsWhen you work or travel in the wild,or encountered apower outage,intelligent solar mobile power will help your busy,make your phoneanytime,anywhere to keep working state,to keep you in touch with other people.3,Whenever and wherever you can,you can be very convenient to charge or charge yourmobile phone or other digital products;4,high efficiency chargingEfficient and fast,just give your phone or other digital products charge 60 minutes,you can get up to 100-150 minutes of use time;5,environmental protection,energy savingUse of green energy,solar energy,and jointly contribute to environmental protection;6,the appearance offashion,easy to carryInnovative design concept,slim aluminum alloy shell design,avariety of colors,beautiful fashion,easy to carry.7,there are multiple differentvoltage optionsOutput voltage are:4.8V,5.8V,8.4V,9V is generally 4.8V,the scope ofapplication is wider.8,with lightsWith high brightness LED,can reach more than 100hours long lighting,convenient for the night and emergency use.Four,productperformance and parameters:Solar panel peak power:1.6WSolar panel voltage:5.5VInputinterface:DC interfaceOutput interface:5P USB interfacePolymer lithium batterycapacity:4200mAhWorking temperature:-10--65Solar charging time:14-20 hours(sunlight intensity:m2/1000W)Solar charge current:230mA-300mA(solar light intensity:m2/1000W)External input DC voltage:4.8V-7.5V+0.5VExternal DC input current:900mA-1200mA(1A)External DC power charge time:3.5-5.5 hoursAdjustable output voltage:5.8V/DC4.8V/8.4V/9.0V(+0.2V)Output current:400mA800mA(0.8A)Low power tip:when thebattery is not enough,LED red light flashing prompt charging.Five,note:1,please usethe original adapter and wire,in order to achieve the best results.2,please do not usesharp objects to scrape the surface of the solar panel.3,do not go beyond the use ofvoltage range charge or power supply,so as to avoid damage to the products andperipherals.4,avoid placing the high temperature(>70 degrees),humidity and corrosiveenvironment,do not use in the vicinity of the fire source.5,after the short circuitprotection,plug in the charger 10 seconds or strong sunlight can restore the output.Manual for the use of solar energy automatic lamp productsAutomatic solar insecticidallamps using solar power technology and pest phototaxis design research and development,which is mainly TPSC3.
2015年10月25日星期日
Outside Lighting Solar
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
Visit: www.cn-solargardenlights.com for details
At present,there are some solar lawn lamp 30 super bright white LED,input power of 2Wabove,in this case,if the if the trichromatic color high-performance energy-savinglamp,the price is only 1/10 of the LED,luminous flux for four times the original,now has been developed for low voltage DC 2~10W three Color color high-performanceenergy-saving lamp,life can be up to 6000 hours.Based on the above analysis,webelieve that the brightness adjustment,with the frequent switching function of 1W belowsmall power solar lawn lamp,the general should be made with LED as the light source.But when using super bright white LED particular attention to lumen maintenance rate,otherwise easily lead to accidents.For larger power solar lawn lamp currently usedtrichromatic color high-performance energy-saving lamp is reasonable.The emphasis hereis,the above conclusion is only the current analysis,when the led to improve thetechnical level,the decline in prices.For solar garden lights,from the reliability,performance to price ratio,temperature,and light emitting efficiency of several aspects of the comprehensive consideration,webelieve that the ideal light source should be currently trichromatic color high-performance energy-saving lamp 5 LED use pay attention to Item 1)due to the operatingvoltage of the LED change 0.1V,current may change 20mA around.For safety,underordinary circumstances the use current limiting resistor in series,great energy loss isobviously not suitable for solar lawn lamp and LED brightness varies with the workingvoltage.The boost circuit is a good way,can also be used for simple constant currentcircuit,a total of Set to automatic current limit,otherwise it will damage the LEDs.2)led by general peak current 50~100mA.About reverse voltage 6V,pay attention to donot exceed this limit,especially in solar battery reverse connection or battery no-load,boost circuit,peak voltage is too high is can exceed this limit,damage the LEDs.3)led temperature characteristic is not good,the temperature rise of 5 DEG C,fluxdeclined 3%,use in the summer should pay attention to.4)operating voltage largediscreteness,the same types of,the same batch of LED operating voltage have certaindifference,should not be used in tandem.To be used in parallel,should consider theuniform flow.5 super bright white LED color temperature 6400k~30000k.,low colortemperature of super bright white LED is not into the market,so super bright white LEDmanufacturing of solar lawn light penetration ability is poor,so we should payattention to in the design of optical.6)electrostatic of super bright white LEDinfluence greatly in installation to have anti-static facilities,workers should wearanti-static wrist.By electrostatic damage of super bright white LED was probably by theeye to look not to come out,but the service life will be shortened.
Visit: www.cn-solargardenlights.com for details
At present,there are some solar lawn lamp 30 super bright white LED,input power of 2Wabove,in this case,if the if the trichromatic color high-performance energy-savinglamp,the price is only 1/10 of the LED,luminous flux for four times the original,now has been developed for low voltage DC 2~10W three Color color high-performanceenergy-saving lamp,life can be up to 6000 hours.Based on the above analysis,webelieve that the brightness adjustment,with the frequent switching function of 1W belowsmall power solar lawn lamp,the general should be made with LED as the light source.But when using super bright white LED particular attention to lumen maintenance rate,otherwise easily lead to accidents.For larger power solar lawn lamp currently usedtrichromatic color high-performance energy-saving lamp is reasonable.The emphasis hereis,the above conclusion is only the current analysis,when the led to improve thetechnical level,the decline in prices.For solar garden lights,from the reliability,performance to price ratio,temperature,and light emitting efficiency of several aspects of the comprehensive consideration,webelieve that the ideal light source should be currently trichromatic color high-performance energy-saving lamp 5 LED use pay attention to Item 1)due to the operatingvoltage of the LED change 0.1V,current may change 20mA around.For safety,underordinary circumstances the use current limiting resistor in series,great energy loss isobviously not suitable for solar lawn lamp and LED brightness varies with the workingvoltage.The boost circuit is a good way,can also be used for simple constant currentcircuit,a total of Set to automatic current limit,otherwise it will damage the LEDs.2)led by general peak current 50~100mA.About reverse voltage 6V,pay attention to donot exceed this limit,especially in solar battery reverse connection or battery no-load,boost circuit,peak voltage is too high is can exceed this limit,damage the LEDs.3)led temperature characteristic is not good,the temperature rise of 5 DEG C,fluxdeclined 3%,use in the summer should pay attention to.4)operating voltage largediscreteness,the same types of,the same batch of LED operating voltage have certaindifference,should not be used in tandem.To be used in parallel,should consider theuniform flow.5 super bright white LED color temperature 6400k~30000k.,low colortemperature of super bright white LED is not into the market,so super bright white LEDmanufacturing of solar lawn light penetration ability is poor,so we should payattention to in the design of optical.6)electrostatic of super bright white LEDinfluence greatly in installation to have anti-static facilities,workers should wearanti-static wrist.By electrostatic damage of super bright white LED was probably by theeye to look not to come out,but the service life will be shortened.
2015年10月24日星期六
Solar Lights For Decking
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
Visit: www.cn-solargardenlights.com for details
This is known as the urban heat island effect.In order to prevent the heat island effect is generally the solar battery obliquely placed,so that the leaves are not attached to,at the same time Solar cell components are installed on the battery charge and discharge control regardless of the size of solar lamps,a good performance of charging and discharging control circuit is essential.To extend the service life of the battery,it is necessary to limit the charge and discharge conditions,to prevent the battery charging and deep discharge,in addition,due to solar photo voltaic power generation system in the control of battery charging more complicated.Failure and success,without a good performance of the charging and discharging control circuit,it is impossible to have a good performance of solar lamps.3.1 anti reverse charge control to prevent the anti charging function,generally is in the solar loop series a diode,diode to prevent reverse charge,the diode should be is a Schottky diode,Schottky diode drop B iP through diode is low.In addition,field effect transistor control to prevent the anti charging function,the pipe pressure drop is lower than that of Schottky diode,just control circuit to be more complex than the front.3.2 anti over charging control to prevent over charging Function,can be connected in series or parallel with a discharge transistor,voltage differential circuit control transistor switch,the excess solar energy through the transistor discharge,ensure that no high voltage to battery charging.The key is to prevent over charging voltage,single lead acid battery for 2.2V.3.3 in addition to the Ni-Cd battery,the battery has a battery of permanent damage.Discharge,so the discharge voltage is not too low.3.4 temperature compensation,battery voltage control point is with the ambient temperature and change,so the solar system should have a temperature controlled reference voltage.
2015年10月22日星期四
Solar Lights For Decking
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
Theconcrete is completely solidified(usually 72 hours or more),and the installation ofthe pendant lamp can be carried out.Three,solar cell module installation1,component,the battery output positive and negative pole connected to the front of the controllermeasures shall be taken to avoid short circuit;2,the solar cell component is connectedwith a support should be solid and reliable;3,the components of the output line shouldavoid bare,and tie fastened;4,battery components toward to toward the south,with thecompass pointing to the quasi.Four,battery installation1,the battery should be placedin the control box gently,prevent damage control box;2,the connecting line of thebattery must be used to press on the battery's terminal and use copper to enhance theelectrical conductivity;3,the output line is connected to the battery in any case,toavoid damage to the battery;4,the battery output line with the wire rod in thecontroller must pass through the PVC line pipe;5,after the completion of the above,check the wiring of the controller,to prevent the short circuit.See the schedule forspecific installation:Five,lamp installation1.Each part of the assembly is fixed:solar panel fixed on the solar plate support and the lamp head is fixed to pick arm,then the frame and cantilever fixed to the main rod,and the connecting wire threadingto the control box(battery box).2.Before the lifting of the lamp post,first check thevarious parts of the fasteners are firmly,lamp whether the correct installation of,light is working properly.Then in simple debugging system is working properly;loosenthe controller of solar panels connected line,working light source;connected to thesolar panels connected line,lights out;at the same time careful observation controlleron the indicating lamp changes;everything is normal,lifting installation.3,the mainpole lifting,pay attention to the safety precautions;screw absolutely good fastening,such as component Chaoyang angle biased and need to end up to adjust the direction ofthe sun rising completely toward the south.FourThe battery into the battery box,inaccordance with the technical requirements of the connecting line to the controller;thebattery,then the load,and then the solar panel.
For more details Click Here.
Theconcrete is completely solidified(usually 72 hours or more),and the installation ofthe pendant lamp can be carried out.Three,solar cell module installation1,component,the battery output positive and negative pole connected to the front of the controllermeasures shall be taken to avoid short circuit;2,the solar cell component is connectedwith a support should be solid and reliable;3,the components of the output line shouldavoid bare,and tie fastened;4,battery components toward to toward the south,with thecompass pointing to the quasi.Four,battery installation1,the battery should be placedin the control box gently,prevent damage control box;2,the connecting line of thebattery must be used to press on the battery's terminal and use copper to enhance theelectrical conductivity;3,the output line is connected to the battery in any case,toavoid damage to the battery;4,the battery output line with the wire rod in thecontroller must pass through the PVC line pipe;5,after the completion of the above,check the wiring of the controller,to prevent the short circuit.See the schedule forspecific installation:Five,lamp installation1.Each part of the assembly is fixed:solar panel fixed on the solar plate support and the lamp head is fixed to pick arm,then the frame and cantilever fixed to the main rod,and the connecting wire threadingto the control box(battery box).2.Before the lifting of the lamp post,first check thevarious parts of the fasteners are firmly,lamp whether the correct installation of,light is working properly.Then in simple debugging system is working properly;loosenthe controller of solar panels connected line,working light source;connected to thesolar panels connected line,lights out;at the same time careful observation controlleron the indicating lamp changes;everything is normal,lifting installation.3,the mainpole lifting,pay attention to the safety precautions;screw absolutely good fastening,such as component Chaoyang angle biased and need to end up to adjust the direction ofthe sun rising completely toward the south.FourThe battery into the battery box,inaccordance with the technical requirements of the connecting line to the controller;thebattery,then the load,and then the solar panel.
For more details Click Here.
2015年10月21日星期三
Garden Led Solar Lights
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
Battery capacity is too small can not meet theneeds of night lighting,the battery capacity is too large,on the one hand,the batteryis always in the state power loss,affect the life of battery.At the same time,resulting in a waste of.2.3 solar cell encapsulation in the form of the solar batterypackage form mainly has two,laminated and epoxy,lamination process can ensure solarcells work life of more than 25 years,epoxy although was beautiful,but solar cellswork life of only 1 to 2 years.Therefore,1W below Small power solar lawn lamp,in nottoo high life requirement of the case,you can use epoxy packaging forms,to use fixednumber of year provisions of solar lights,it is recommended to use laminated packageform.In addition,there is a silicon gel for epoxy encapsulated solar cells.It is saidthat working life can be achieved for 10 years.2.4 solar battery installation of tiltangle and the decorative cover for beauty,some of the solar energy lamp factory will besolar cells are horizontally placed,in this case,the output power of the solar cellwill be reduced by 15%to 20%,if above the solar cell increased a decorative cover.Solar cell output power will be reduced by about 5%,solar battery is expensive,we havecollected many foreign solar energy lamps,in beautiful and energy-saving,most of themchoose to save energy.In the lower reaches of the Yangtze River is the most ideal tiltangle is 40 degrees south.The 2.5 single heat island effect is not used.Such as leavesand guano,separate obscured solar battery under the strong sunlight will heat damage,so that the solar battery component damage.This is known as the urban heat islandeffect.In order to prevent the heat island effect is generally will solar batteryobliquely placed,so that the leaves are not attached to,at the same time in the solarbattery components installed anti bird pin.Charging and discharging control of batteryin solar lampsIn order to prolong the service life of the battery,the charging anddischarging conditions must be limited to prevent the battery from charging and deepdischarge.In addition,due to the instability of solar photovoltaic power generationsystem,the success and failure of photovoltaic power generation system are morecomplicated than that of the ordinary batteries.
For more details Click Here
Battery capacity is too small can not meet theneeds of night lighting,the battery capacity is too large,on the one hand,the batteryis always in the state power loss,affect the life of battery.At the same time,resulting in a waste of.2.3 solar cell encapsulation in the form of the solar batterypackage form mainly has two,laminated and epoxy,lamination process can ensure solarcells work life of more than 25 years,epoxy although was beautiful,but solar cellswork life of only 1 to 2 years.Therefore,1W below Small power solar lawn lamp,in nottoo high life requirement of the case,you can use epoxy packaging forms,to use fixednumber of year provisions of solar lights,it is recommended to use laminated packageform.In addition,there is a silicon gel for epoxy encapsulated solar cells.It is saidthat working life can be achieved for 10 years.2.4 solar battery installation of tiltangle and the decorative cover for beauty,some of the solar energy lamp factory will besolar cells are horizontally placed,in this case,the output power of the solar cellwill be reduced by 15%to 20%,if above the solar cell increased a decorative cover.Solar cell output power will be reduced by about 5%,solar battery is expensive,we havecollected many foreign solar energy lamps,in beautiful and energy-saving,most of themchoose to save energy.In the lower reaches of the Yangtze River is the most ideal tiltangle is 40 degrees south.The 2.5 single heat island effect is not used.Such as leavesand guano,separate obscured solar battery under the strong sunlight will heat damage,so that the solar battery component damage.This is known as the urban heat islandeffect.In order to prevent the heat island effect is generally will solar batteryobliquely placed,so that the leaves are not attached to,at the same time in the solarbattery components installed anti bird pin.Charging and discharging control of batteryin solar lampsIn order to prolong the service life of the battery,the charging anddischarging conditions must be limited to prevent the battery from charging and deepdischarge.In addition,due to the instability of solar photovoltaic power generationsystem,the success and failure of photovoltaic power generation system are morecomplicated than that of the ordinary batteries.
For more details Click Here
2015年10月20日星期二
Solar Outdoor Garden Lights
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
The photoelectric conversionefficiency of about About 2%,slightly lower than that of crystallization silicon solarcells,but the material has the advantages of simple manufacture,saving powerconsumption,the total production cost is low,so get a lot of development.Below is abrief introduction about solar energy battery production process as shown in Figure 2.The silicon raw material into melting pool within the melt casting,to be cooling afterthe formation of a stable state of mufti crystal column body,known as ingot.Then,broken spindles and solar battery slice processing.Figure 2b is the formation potentialof P-and n-type processing on the basic piece of cut.Also in cell sheet printed byobtaining current electrode and the formation of solar battery.Even monolithic solarcells can also produce electricity,but for the access to higher voltage,cells areconnected in series with the group will have to with in order to obtain higher strengthand weathering In the solar cell,the glass is installed at the periphery of the solarcell,the sealing material and the aluminum frame.Principle:first in the light of the premise of the night lighting,the Ba Kantian solarenergy battery pack as much as possible to save storage capacity to meet the needs ofthe night lighting,storage capacity is too small can not meet the needs of nightlighting,battery capacity is too large,on the one hand,the battery is always in astate of loss,and cause waste.5 lighting lamps(LED)at present most of the solarenergy use LED as a light source,LED long life,can reach 00000 h or more,workingvoltage Low,is very suitable for application in solar energy lamp.In particular,LEDtechnology has achieved a breakthrough in the key and its characteristics in the pastfive years have greatly improved the,price ratio is also greatly improved.In addition,led by a low voltage DC power supply,low cost of source control,brightness adjustment,frequent switch are possible and performance of the LED will not produce adverseeffects.To control the color,change of light distribution,dynamic mirage is possible,so it is especially suitable for application in solar lawn lamp.6 European countries such as Germany has already used solar energy,the United Stateshas begun to use.
For more details Click Here
The photoelectric conversionefficiency of about About 2%,slightly lower than that of crystallization silicon solarcells,but the material has the advantages of simple manufacture,saving powerconsumption,the total production cost is low,so get a lot of development.Below is abrief introduction about solar energy battery production process as shown in Figure 2.The silicon raw material into melting pool within the melt casting,to be cooling afterthe formation of a stable state of mufti crystal column body,known as ingot.Then,broken spindles and solar battery slice processing.Figure 2b is the formation potentialof P-and n-type processing on the basic piece of cut.Also in cell sheet printed byobtaining current electrode and the formation of solar battery.Even monolithic solarcells can also produce electricity,but for the access to higher voltage,cells areconnected in series with the group will have to with in order to obtain higher strengthand weathering In the solar cell,the glass is installed at the periphery of the solarcell,the sealing material and the aluminum frame.Principle:first in the light of the premise of the night lighting,the Ba Kantian solarenergy battery pack as much as possible to save storage capacity to meet the needs ofthe night lighting,storage capacity is too small can not meet the needs of nightlighting,battery capacity is too large,on the one hand,the battery is always in astate of loss,and cause waste.5 lighting lamps(LED)at present most of the solarenergy use LED as a light source,LED long life,can reach 00000 h or more,workingvoltage Low,is very suitable for application in solar energy lamp.In particular,LEDtechnology has achieved a breakthrough in the key and its characteristics in the pastfive years have greatly improved the,price ratio is also greatly improved.In addition,led by a low voltage DC power supply,low cost of source control,brightness adjustment,frequent switch are possible and performance of the LED will not produce adverseeffects.To control the color,change of light distribution,dynamic mirage is possible,so it is especially suitable for application in solar lawn lamp.6 European countries such as Germany has already used solar energy,the United Stateshas begun to use.
For more details Click Here
2015年10月19日星期一
Outdoor Solar Home Light
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
Qualifier is engineering companies ignore a problem is,of course,give a solarlantern system,the value of the smallest part,defining the quality is not bad,12V/10Ais price of 100-200 yuan range.Defining the quality directly affect the solar solarlantern system component life and the lift system of Yuehe cost.A:the admitted tochoose power lower limit,limit is 24 hours not intermittent employment,such as largepower consumption,loss of power,the best choice of power consumption in 5 Maqualifier.Second:to choice of charging high potency Qualifier,but MCT charging modequalifier can take the initiative to track the maximum current of the battery plate,especially in winter or light according to the era of deficit,MCT charging mode thanthe other above about 20%of the effectiveness.3:should adjust the power but thequalifier,power conditioning but the qualifier has been open numerous,can in the nighttime pedestrian oligo less time take the initiative to reduce employment current of theLED lamp,thrifty and simple electricity,but also save the configuration of theproportion of panels.In addition to choose more power saving effect,love should belimited for batteries and other components of the protection function of like weekpreparing trickle charge mode qualifier can be a very good Stolen property stolen stopbecause of fraud on the landing,undervoltage protection of battery,an increase ofbattery lifetime and also Buyang qualifier security value,try to prevent battery overdischarge,the undervoltage protection value adjustment was more than or equal to thebattery overcharge,over discharge urban life.No useful security,all affect the normalillumination,a lot of engineering business is extensive,5,the separation of urban farplace should also pay attention to security of employment,leading to the battery,thebattery plate and other components,but also caused does not need to be lost.Batteryburied in private with pouring cement is a kind of useful anti-theft method,the eye ofengineering case mostly for battery and battery plate,and can play to the thermostatDisposal of without discomfort than the pole of stolen more than 5m in height of polefar.Be sure to increase with the temperature sensing line.
For more details Click Here.
Qualifier is engineering companies ignore a problem is,of course,give a solarlantern system,the value of the smallest part,defining the quality is not bad,12V/10Ais price of 100-200 yuan range.Defining the quality directly affect the solar solarlantern system component life and the lift system of Yuehe cost.A:the admitted tochoose power lower limit,limit is 24 hours not intermittent employment,such as largepower consumption,loss of power,the best choice of power consumption in 5 Maqualifier.Second:to choice of charging high potency Qualifier,but MCT charging modequalifier can take the initiative to track the maximum current of the battery plate,especially in winter or light according to the era of deficit,MCT charging mode thanthe other above about 20%of the effectiveness.3:should adjust the power but thequalifier,power conditioning but the qualifier has been open numerous,can in the nighttime pedestrian oligo less time take the initiative to reduce employment current of theLED lamp,thrifty and simple electricity,but also save the configuration of theproportion of panels.In addition to choose more power saving effect,love should belimited for batteries and other components of the protection function of like weekpreparing trickle charge mode qualifier can be a very good Stolen property stolen stopbecause of fraud on the landing,undervoltage protection of battery,an increase ofbattery lifetime and also Buyang qualifier security value,try to prevent battery overdischarge,the undervoltage protection value adjustment was more than or equal to thebattery overcharge,over discharge urban life.No useful security,all affect the normalillumination,a lot of engineering business is extensive,5,the separation of urban farplace should also pay attention to security of employment,leading to the battery,thebattery plate and other components,but also caused does not need to be lost.Batteryburied in private with pouring cement is a kind of useful anti-theft method,the eye ofengineering case mostly for battery and battery plate,and can play to the thermostatDisposal of without discomfort than the pole of stolen more than 5m in height of polefar.Be sure to increase with the temperature sensing line.
For more details Click Here.
Solar Led Outdoor Lighting
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
Solar power generation is an important means to develop low-carbon economy.This paperpresents a brief introduction of solar energy generation system,and gives a briefintroduction of solar energy and solar energy,which is an important way to developlow-carbon economy.Solar energy is generally refers to the radiation energy of the sunlight,in modern general used to generate electricity.Solar energy resources totalequivalent to now 10000 times more than the use of human energy,but solar energydensity is low,so the use of solar energy is not very common.Using solar power stillexist high cost,low conversion efficiency.Solar energy as a energy,renewable energyis.It is rich in resources can use free of charge,and no transport,on the environmentwithout any pollution.Humans created a new form of life,so that human society and intoa festival about energy and reducing pollution of age.Second,solar power generationsystemSolar energy utilization has two kinds of ways:solar thermal conversion andphotoelectric conversion.In the present,the photoelectric conversion is more widelyused.Solar photovoltaic system is composed of solar cells,solar controller andbattery.(a)solar panel:solar panels are the core part of the solar power generationsystem,and it is also the most valuable part of the solar power system.The role is toconvert the solar radiation power into electrical energy,or to the storage of thebattery,or to promote the load.(two)solar controller:the full name of the solarcontroller is the solar charge and discharge controller,which is used in solar powergeneration system,the control of multi-channel solar cell battery charging andbattery to solar inverter load power supply.(III)battery:General lead-acid batteries,small or micro systems,available nickel metal hydride batteries,nickel cadmium batteryor lithium battery.
Visit: http://www.cn-solargardenlights.com for details
Solar power generation is an important means to develop low-carbon economy.This paperpresents a brief introduction of solar energy generation system,and gives a briefintroduction of solar energy and solar energy,which is an important way to developlow-carbon economy.Solar energy is generally refers to the radiation energy of the sunlight,in modern general used to generate electricity.Solar energy resources totalequivalent to now 10000 times more than the use of human energy,but solar energydensity is low,so the use of solar energy is not very common.Using solar power stillexist high cost,low conversion efficiency.Solar energy as a energy,renewable energyis.It is rich in resources can use free of charge,and no transport,on the environmentwithout any pollution.Humans created a new form of life,so that human society and intoa festival about energy and reducing pollution of age.Second,solar power generationsystemSolar energy utilization has two kinds of ways:solar thermal conversion andphotoelectric conversion.In the present,the photoelectric conversion is more widelyused.Solar photovoltaic system is composed of solar cells,solar controller andbattery.(a)solar panel:solar panels are the core part of the solar power generationsystem,and it is also the most valuable part of the solar power system.The role is toconvert the solar radiation power into electrical energy,or to the storage of thebattery,or to promote the load.(two)solar controller:the full name of the solarcontroller is the solar charge and discharge controller,which is used in solar powergeneration system,the control of multi-channel solar cell battery charging andbattery to solar inverter load power supply.(III)battery:General lead-acid batteries,small or micro systems,available nickel metal hydride batteries,nickel cadmium batteryor lithium battery.
Visit: http://www.cn-solargardenlights.com for details
2015年10月6日星期二
Wall Mounted Solar Lights
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
Manual rechargeable LED solar lights, there are two types. One is this solar lights has an active cylindrical magnet can slide in the hand shake in a coil, the coil current and the battery is charged by the rectifier, light a LED light. Another smelt generator rotor is driven by hand pressure solar lights, this solar lights lower prices, but such a manual power LED solar lights mostly poor reliability. 3. With three multi-lamp type battery
Lamp (ie LED) number from a dozen to twenty thirty, many reach over forty lamp. Most solar lights shell is made of aluminum alloy, solar lights switch some settings in the tail, some arranged in the side front portion, the front side of the switch relatively convenient to use. Due to the high brightness LED ignition voltage of about 3V, so this using three AAA batteries LED solar lights does not need to be able to directly boost the lighting, so a higher power efficiency, only a very small energy consumption limit stream resistance. It should be noted is that the more the number, the better is not the LED. Opt net automotive supplies, experts advise, but also pay attention to see if there is good quality back lamp reflective film, it can scatter light reflected LED, solar lights brightness can be increased by 20% to 30%. The main disadvantage of this multi-lamp solar lights concentrating effect is not very good, significantly better than the ordinary solar lights concentrating effect, so when irradiated onto distant objects it is not bright enough.
4. Single-lamp High power LED solar lights High power LED solar lights single lamp, is the use of a power of 1W ~ 5W LED light single solar lights. This single lamp solar lights used power LED, there is also the use of domestic imported. Generally the higher imports of high-power LED light effects, but the price is much higher. The biggest advantage of this single-lamp high power LED solar lights is concentrating better, but still depends solar lights poly mask production if well. Manufacture more formal single lamp power LED solar lights, its concentrating effect close to ordinary solar lights, but also higher brightness. 5. The plastic case Rechargeable LED solar lights
Plastic housing rechargeable solar lights, is often cheaper lead-acid batteries of long LED solar lights.
More information visit: http://www.cn-solargardenlights.com
Manual rechargeable LED solar lights, there are two types. One is this solar lights has an active cylindrical magnet can slide in the hand shake in a coil, the coil current and the battery is charged by the rectifier, light a LED light. Another smelt generator rotor is driven by hand pressure solar lights, this solar lights lower prices, but such a manual power LED solar lights mostly poor reliability. 3. With three multi-lamp type battery
Lamp (ie LED) number from a dozen to twenty thirty, many reach over forty lamp. Most solar lights shell is made of aluminum alloy, solar lights switch some settings in the tail, some arranged in the side front portion, the front side of the switch relatively convenient to use. Due to the high brightness LED ignition voltage of about 3V, so this using three AAA batteries LED solar lights does not need to be able to directly boost the lighting, so a higher power efficiency, only a very small energy consumption limit stream resistance. It should be noted is that the more the number, the better is not the LED. Opt net automotive supplies, experts advise, but also pay attention to see if there is good quality back lamp reflective film, it can scatter light reflected LED, solar lights brightness can be increased by 20% to 30%. The main disadvantage of this multi-lamp solar lights concentrating effect is not very good, significantly better than the ordinary solar lights concentrating effect, so when irradiated onto distant objects it is not bright enough.
4. Single-lamp High power LED solar lights High power LED solar lights single lamp, is the use of a power of 1W ~ 5W LED light single solar lights. This single lamp solar lights used power LED, there is also the use of domestic imported. Generally the higher imports of high-power LED light effects, but the price is much higher. The biggest advantage of this single-lamp high power LED solar lights is concentrating better, but still depends solar lights poly mask production if well. Manufacture more formal single lamp power LED solar lights, its concentrating effect close to ordinary solar lights, but also higher brightness. 5. The plastic case Rechargeable LED solar lights
Plastic housing rechargeable solar lights, is often cheaper lead-acid batteries of long LED solar lights.
More information visit: http://www.cn-solargardenlights.com
2015年10月5日星期一
Outdoor Solar Powered Lights
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
The task of the present invention is accomplished by the following ways: 1, waterproof (pictured)
Through the lens cap sealing gasket, fluorescent lamp apron, cylinder sealing tape, switch sealing gasket, battery cover gasket and screws achieve a waterproof seal. among them:
(1) Lens watertight: the edge of a circle concave groove on each side of a narrow slot fastening chuck and lamp tube inner oval lamp corresponding side cover, both sides have a wide-brimmed tightening the seal Aprons lamp placed inside the edge of the slot cover, by tightening chuck, tighten the screws and reflective lampshade reaction force, the lens cap and the cap side closely to achieve watertight.
(2) watertight cap: cap lamp tube outer edge of a circle concave groove recess, the fluorescent lamp in the slot apron, the cap side cover by tightening the screws to fasten the side cover with the cap lamp tube closely to achieve watertight .
(3) Light tube seal: lamp tube is divided into two parts, with a sealing strip card in the lower edge of the concave groove, the upper fastening screw and a total of six holes on the lower part corresponds to the upper and lower engaging between, tight fixing screws, can be closely integrated lamp tube up and down between the two to achieve watertight.
(4) switch watertight:
(5) Battery cover watertight: the battery cover gasket on the upper part of the battery tube lights around the mouth of the concave groove, fasten the battery cover, tighten the screws on the upper end, so close connection between the battery cover and the cylinder to achieve watertight .
(6) screw seals: asbestos pad sets each have a screw, screw fastening screw holes will also seal. 2, lamp lighting (pictured)
A. By a semi-ellipsoidal transparent PVC material floodlights cover may be poly solar lantern beam into a divergent illumination lamp suitable light source. The narrow sides of the shade card have a protruding head, with a concave deck cover cap side corresponds to when the assembly and disassembly, first one side of the alignment plug, and then the other side a little harder to pressing inner deformed, shade the other side of the card can be loaded or unloaded deck head.
More information visit: http://www.cn-solargardenlights.com
The task of the present invention is accomplished by the following ways: 1, waterproof (pictured)
Through the lens cap sealing gasket, fluorescent lamp apron, cylinder sealing tape, switch sealing gasket, battery cover gasket and screws achieve a waterproof seal. among them:
(1) Lens watertight: the edge of a circle concave groove on each side of a narrow slot fastening chuck and lamp tube inner oval lamp corresponding side cover, both sides have a wide-brimmed tightening the seal Aprons lamp placed inside the edge of the slot cover, by tightening chuck, tighten the screws and reflective lampshade reaction force, the lens cap and the cap side closely to achieve watertight.
(2) watertight cap: cap lamp tube outer edge of a circle concave groove recess, the fluorescent lamp in the slot apron, the cap side cover by tightening the screws to fasten the side cover with the cap lamp tube closely to achieve watertight .
(3) Light tube seal: lamp tube is divided into two parts, with a sealing strip card in the lower edge of the concave groove, the upper fastening screw and a total of six holes on the lower part corresponds to the upper and lower engaging between, tight fixing screws, can be closely integrated lamp tube up and down between the two to achieve watertight.
(4) switch watertight:
(5) Battery cover watertight: the battery cover gasket on the upper part of the battery tube lights around the mouth of the concave groove, fasten the battery cover, tighten the screws on the upper end, so close connection between the battery cover and the cylinder to achieve watertight .
(6) screw seals: asbestos pad sets each have a screw, screw fastening screw holes will also seal. 2, lamp lighting (pictured)
A. By a semi-ellipsoidal transparent PVC material floodlights cover may be poly solar lantern beam into a divergent illumination lamp suitable light source. The narrow sides of the shade card have a protruding head, with a concave deck cover cap side corresponds to when the assembly and disassembly, first one side of the alignment plug, and then the other side a little harder to pressing inner deformed, shade the other side of the card can be loaded or unloaded deck head.
More information visit: http://www.cn-solargardenlights.com
2015年10月4日星期日
Solar Powered Garden Light
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
3, solar lantern system design ideas and points
The same basic principles of solar photovoltaic systems, solar lantern design therefore also be based on the general idea of ??a solar power generation system, first determine the power of the solar cell module, and then calculate the battery capacity. But solar street has its particularity, the need to ensure a stable and reliable operation of the system, so they need special attention in the design.
Now, an example of solar lantern system design elements, such as: the need to install a number of solar lights in a city, light power is 30W, the requirements street work eight hours a day to ensure continuous seven rainy days to work properly. Local longitude 114 degrees, 23 degrees north latitude, the annual average daily solar radiation was 3.82 KW.h / m2, the average monthly temperature of 20.5 degrees, the time interval of two consecutive rainy days 25 days long.
Based on the above information, calculate the PV module inclination angle of 26 degrees, a standard peak number of 3.9 hours. (1) load on power consumption
Q = W * H / U = 30W × 8H ÷ 12V = 20 Ah battery where U is the nominal voltage system
The charging current I1 (2) satisfy the load on the power of the solar cell module = Q * 1.05 / h / 0.85 / 0.9 = 7.04 A
Where 1.05 is an integrated solar charging loss coefficient, 0.85 for the battery charging efficiency, 0.9 for the controller efficiency. (3) determine the battery capacity
Meet eight consecutive rainy days working normal battery capacity C
C = Q * (d + 1) /0.75*1.1=20*8/0.75*1.1=235Ah take 240Ah formula for the battery discharge depth of 0.75, 1.1 safety factor batteries. Select two 12V / 120Ah battery comprising a battery
(4) after consecutive rainy days need to restore the battery capacity of the solar cell module charging current I2 I2 = C * 0.75 / h / D = 240 * 0.75 / 3.9 / 25 = 1.85A where 0.75 for the battery discharge depth
Power (5) solar modules for the (I1 + I2) * 18 = (1.85 + 7.04) * 18 = 160Wp
18 is a solar cell module in which the operating voltage, select two peak power of the solar cell module 80Wp
4. Selection of the key components of solar lantern 4.1 solar components
Voltage solar modules will decrease with increasing temperature, due to the effects of high temperatures, the battery pack voltage loss of about 2V, and a diode drop 0.7V charging process controller, so choose the operating voltage of 18V components.
Due to the special nature of solar lights, solar panels are generally mounted on poles,
More information visit: http://www.cn-solargardenlights.com
3, solar lantern system design ideas and points
The same basic principles of solar photovoltaic systems, solar lantern design therefore also be based on the general idea of ??a solar power generation system, first determine the power of the solar cell module, and then calculate the battery capacity. But solar street has its particularity, the need to ensure a stable and reliable operation of the system, so they need special attention in the design.
Now, an example of solar lantern system design elements, such as: the need to install a number of solar lights in a city, light power is 30W, the requirements street work eight hours a day to ensure continuous seven rainy days to work properly. Local longitude 114 degrees, 23 degrees north latitude, the annual average daily solar radiation was 3.82 KW.h / m2, the average monthly temperature of 20.5 degrees, the time interval of two consecutive rainy days 25 days long.
Based on the above information, calculate the PV module inclination angle of 26 degrees, a standard peak number of 3.9 hours. (1) load on power consumption
Q = W * H / U = 30W × 8H ÷ 12V = 20 Ah battery where U is the nominal voltage system
The charging current I1 (2) satisfy the load on the power of the solar cell module = Q * 1.05 / h / 0.85 / 0.9 = 7.04 A
Where 1.05 is an integrated solar charging loss coefficient, 0.85 for the battery charging efficiency, 0.9 for the controller efficiency. (3) determine the battery capacity
Meet eight consecutive rainy days working normal battery capacity C
C = Q * (d + 1) /0.75*1.1=20*8/0.75*1.1=235Ah take 240Ah formula for the battery discharge depth of 0.75, 1.1 safety factor batteries. Select two 12V / 120Ah battery comprising a battery
(4) after consecutive rainy days need to restore the battery capacity of the solar cell module charging current I2 I2 = C * 0.75 / h / D = 240 * 0.75 / 3.9 / 25 = 1.85A where 0.75 for the battery discharge depth
Power (5) solar modules for the (I1 + I2) * 18 = (1.85 + 7.04) * 18 = 160Wp
18 is a solar cell module in which the operating voltage, select two peak power of the solar cell module 80Wp
4. Selection of the key components of solar lantern 4.1 solar components
Voltage solar modules will decrease with increasing temperature, due to the effects of high temperatures, the battery pack voltage loss of about 2V, and a diode drop 0.7V charging process controller, so choose the operating voltage of 18V components.
Due to the special nature of solar lights, solar panels are generally mounted on poles,
More information visit: http://www.cn-solargardenlights.com
2015年10月3日星期六
Decking Solar Lights
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
Combination tone
Survey results, the reporter also interviewed relevant experts, to promote the use of energy-saving lamps in-depth analysis of the status quo. Investigation and analysis showed that one of the main constraints popularity of energy-saving lamps, energy-saving lamps are some consumers still lack a certain understanding. Data show that although China is the world's largest producer of energy-saving lamps, energy-saving lamps in 2005 production reached 1.76 billion, accounting for about 90% of world production, but relatively low level of understanding of people's energy-saving lamps. Survey evidence suggests that there is, because of the low utilization rate of energy-saving lamps respondents "do not understand the product," some respondents confused with energy-saving lamps and fluorescent lamps. Price is another important reason for the popularity of energy-saving lamps constraints. 32.1% of respondents believe that the price of energy-saving lamps too high. Survey, many respondents were positive for the promotion of energy-saving lamps brainstorming. 44.2% of the respondents to the promotion of energy-saving lamps recommendations, including 18.8% expect to increase its efforts to promote energy-saving lamps. 83% of respondents believe that should be forced to promote the use of energy-saving lamps in public lighting. They believe that "energy is imperative, it should limit the development of non-energy-saving lamps at the policy level," "in public places where a large amount of electricity to be widely used even enforced." Some respondents also suggested that should develop "national mandatory standards", "brightness unified energy standards," and so on, so that consumers can rest assured that buy energy-saving lamps. But the survey found that energy-saving lamp production order is chaotic, some of the plants in order to mimic the main.
Emerging LED lighting industry development potential is infinite.
A, LED lighting to highlight energy-saving advantages indicate its future can not shake the current industry leader, according to
Ming accounts for about 20 percent of total world energy consumption. China since 2003, he has frequently encountered electricity shortage crisis, which also led to the social thinking of alternative energy sources and new energy sources.
More information visit: http://www.cn-solargardenlights.com
Combination tone
Survey results, the reporter also interviewed relevant experts, to promote the use of energy-saving lamps in-depth analysis of the status quo. Investigation and analysis showed that one of the main constraints popularity of energy-saving lamps, energy-saving lamps are some consumers still lack a certain understanding. Data show that although China is the world's largest producer of energy-saving lamps, energy-saving lamps in 2005 production reached 1.76 billion, accounting for about 90% of world production, but relatively low level of understanding of people's energy-saving lamps. Survey evidence suggests that there is, because of the low utilization rate of energy-saving lamps respondents "do not understand the product," some respondents confused with energy-saving lamps and fluorescent lamps. Price is another important reason for the popularity of energy-saving lamps constraints. 32.1% of respondents believe that the price of energy-saving lamps too high. Survey, many respondents were positive for the promotion of energy-saving lamps brainstorming. 44.2% of the respondents to the promotion of energy-saving lamps recommendations, including 18.8% expect to increase its efforts to promote energy-saving lamps. 83% of respondents believe that should be forced to promote the use of energy-saving lamps in public lighting. They believe that "energy is imperative, it should limit the development of non-energy-saving lamps at the policy level," "in public places where a large amount of electricity to be widely used even enforced." Some respondents also suggested that should develop "national mandatory standards", "brightness unified energy standards," and so on, so that consumers can rest assured that buy energy-saving lamps. But the survey found that energy-saving lamp production order is chaotic, some of the plants in order to mimic the main.
Emerging LED lighting industry development potential is infinite.
A, LED lighting to highlight energy-saving advantages indicate its future can not shake the current industry leader, according to
Ming accounts for about 20 percent of total world energy consumption. China since 2003, he has frequently encountered electricity shortage crisis, which also led to the social thinking of alternative energy sources and new energy sources.
More information visit: http://www.cn-solargardenlights.com
2015年10月2日星期五
Best Solar Lights For Yard
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
Solar Light Market Analysis
(A) LED Advantages:
1, energy: LED spectrum almost all concentrated in the visible light spectrum, the luminous efficiency of up to 80 ~ 9
0%. Reporters will be LED with ordinary incandescent lamp, spiral energy-saving lamps and T5 fluorescent trichromatic do some comparison results showed that: ordinary incandescent light efficiency is 12lm / W, life less than 2000 hours, the luminous efficiency of 60lm spiral energy-saving lamps / W, life less than 8000 hours, T5 fluorescent lamps compared to 96lm / W, life of about 10,000 hours, while the diameter of 5 mm white LED is 20 ~ 28lm / W, life can be more than 100,000 hours. It was also predicted that the future of LED lifetime limit will be infinite. Most people think that energy-saving lamps can save energy 4/5 is a great initiative, but also energy saving lamp LED than 1/4, which is solid light source greater reforms. In addition, LED also has other advantages, high quality light, almost no radiation, is a typical green lighting; reliable and durable, very low maintenance costs, and so on. Because LED light source also has over other solid unbeatable features, 10 years after the LED lighting industry will be the main source.
2, green: LED in the production process do not add "mercury" nor require inflatable, no glass shell, anti-
Impact resistance, shock resistance, unbreakable, easy to transport, very green, known as "green energy"
3, life is very long: generally between 50 000 -10 million hours, because LED is a semiconductor device, even frequent
Fan switch, it will not affect the life
4, the volume is very small LED elements: easier to layout and design of various devices, and can be more
Good night lighting to achieve, "we saw the light but not light" effect
5, a high concentration of light energy emitted by the LED: concentrated in a smaller wavelength window, purity
High.
More information visit: http://www.cn-solargardenlights.com
Solar Light Market Analysis
(A) LED Advantages:
1, energy: LED spectrum almost all concentrated in the visible light spectrum, the luminous efficiency of up to 80 ~ 9
0%. Reporters will be LED with ordinary incandescent lamp, spiral energy-saving lamps and T5 fluorescent trichromatic do some comparison results showed that: ordinary incandescent light efficiency is 12lm / W, life less than 2000 hours, the luminous efficiency of 60lm spiral energy-saving lamps / W, life less than 8000 hours, T5 fluorescent lamps compared to 96lm / W, life of about 10,000 hours, while the diameter of 5 mm white LED is 20 ~ 28lm / W, life can be more than 100,000 hours. It was also predicted that the future of LED lifetime limit will be infinite. Most people think that energy-saving lamps can save energy 4/5 is a great initiative, but also energy saving lamp LED than 1/4, which is solid light source greater reforms. In addition, LED also has other advantages, high quality light, almost no radiation, is a typical green lighting; reliable and durable, very low maintenance costs, and so on. Because LED light source also has over other solid unbeatable features, 10 years after the LED lighting industry will be the main source.
2, green: LED in the production process do not add "mercury" nor require inflatable, no glass shell, anti-
Impact resistance, shock resistance, unbreakable, easy to transport, very green, known as "green energy"
3, life is very long: generally between 50 000 -10 million hours, because LED is a semiconductor device, even frequent
Fan switch, it will not affect the life
4, the volume is very small LED elements: easier to layout and design of various devices, and can be more
Good night lighting to achieve, "we saw the light but not light" effect
5, a high concentration of light energy emitted by the LED: concentrated in a smaller wavelength window, purity
High.
More information visit: http://www.cn-solargardenlights.com
2015年9月29日星期二
Cheap Solar Lights Outdoor Manufacturers
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
More news at out website: http://www.cn-solargardenlights.com
Development and use of solar energy is far from promising, nearly have effective career. Promotion of solar photovoltaic technology in lighting is a new topic. With solar energy technology development and industrialization process deepening, the efficiency of solar photovoltaic technology, cost will rapidly increase, it will be widely used in various fields, will greatly promote China's "green lighting project" rapid development.
LED lighting technology into the lighting is a revolutionary leap. LED historic contribution to the development of green lighting tube era will in no way inferior to the transistor era leap across to the rating of the transistor as LSI upheaval, as also no exaggeration.
In landscape lighting, as described herein, LED has a more unique advantages, LED landscape lighting can be convinced that the multi-disciplinary integration along the road, toward the artistic, intelligent, rapid development of flexible direction. LED is pregnant with unlimited business opportunities
We believe that the set of a new generation of solar energy and semiconductor lighting system, new generation of light will certainly merits an unprecedented pace, leading us into a new era of green energy!
Solar lighting composition, characteristics and precautions
Accessories features
1. (a) lamp beads
Lamp beads solar lamps the most important components, just started very odd people, why lamp beads price yuan range from 2-10, which is a difference; lamp beads packaging technology, the production environment and the materials used It will affect its price.
(1) get a lamp beads, first look cleanliness, if the potting process is not good, you will see around the overflow of glue dirty, you may also see a lot of bubbles, which is and packaging factory production environment a.
(2) look at the size, shape, solid crystal technology, as well as the size of the lens chip lamp beads.
The size of the lamp beads ranging from 35ml-50ml, prices are very different, for example, if the shape of the wafer sheet will be much cheaper, "the solid crystal" if it is automatic line will be very neat, pc lens, a chip the size you want and matching, if not qualified is very easy to produce very serious spot.
More news at out website: http://www.cn-solargardenlights.com
Development and use of solar energy is far from promising, nearly have effective career. Promotion of solar photovoltaic technology in lighting is a new topic. With solar energy technology development and industrialization process deepening, the efficiency of solar photovoltaic technology, cost will rapidly increase, it will be widely used in various fields, will greatly promote China's "green lighting project" rapid development.
LED lighting technology into the lighting is a revolutionary leap. LED historic contribution to the development of green lighting tube era will in no way inferior to the transistor era leap across to the rating of the transistor as LSI upheaval, as also no exaggeration.
In landscape lighting, as described herein, LED has a more unique advantages, LED landscape lighting can be convinced that the multi-disciplinary integration along the road, toward the artistic, intelligent, rapid development of flexible direction. LED is pregnant with unlimited business opportunities
We believe that the set of a new generation of solar energy and semiconductor lighting system, new generation of light will certainly merits an unprecedented pace, leading us into a new era of green energy!
Solar lighting composition, characteristics and precautions
Accessories features
1. (a) lamp beads
Lamp beads solar lamps the most important components, just started very odd people, why lamp beads price yuan range from 2-10, which is a difference; lamp beads packaging technology, the production environment and the materials used It will affect its price.
(1) get a lamp beads, first look cleanliness, if the potting process is not good, you will see around the overflow of glue dirty, you may also see a lot of bubbles, which is and packaging factory production environment a.
(2) look at the size, shape, solid crystal technology, as well as the size of the lens chip lamp beads.
The size of the lamp beads ranging from 35ml-50ml, prices are very different, for example, if the shape of the wafer sheet will be much cheaper, "the solid crystal" if it is automatic line will be very neat, pc lens, a chip the size you want and matching, if not qualified is very easy to produce very serious spot.
2015年9月28日星期一
Garden Solar Lanterns Manufacturers
Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China
Visit website: http://www.cn-solargardenlights.com
Visit website: http://www.cn-solargardenlights.com
Prospects of solar LED lighting
Eight, solar LED lighting system application:
Application of solar photovoltaic technology has a very important role not only in remote areas and the temporary lack of electricity has also been rapidly growing popularity in other regions, it has been used in transportation, construction, agriculture, forestry and other industries. Especially in the lighting project, it is colorful.
a. urban lighting lighting
Current solar PV technology in urban lighting lighting application has started and rapid development momentum gradually spread application. Signs, warning signs, lawn, etc. may be solar photovoltaic street lighting and technical schools, parks, residential areas, villas and other places to make it easier for public lighting, security, environmental protection and energy saving. Solar lighting lighting works are: solar panels as a power generation system that allows solar panels power through power diode and control system to recharge the battery when the battery power reaches a certain level, automatic protection system operation control system built-in, solar panels automatically cut off the power supply, the implementation of automatic protection. Night, solar panels and light control also played a role, issuing instructions to the control system, then the control system automatically turns on, the output voltage, so that all kinds of lighting to lighting design. And the time required to adjust the lighting.
Solar Landscape design mostly uses a combination of metal and plastic die casting, light body can exhibit a variety of shapes, round, square, geometric patterns and so on, deportment thousands, styles, or luxurious and elegant, or simple and neat. Light body color white, red, green, blue, purple, yellow, etc., followed by gradual or flashes. The system automatically starts after dark lighting device, at first glance, the lamp body to issue a uniform soft light, several colors jump gradient, the city's night rhythm up at the moment. While the solar pole rods generally 8 to 13 meters high, lighting power 50W ~ 130W, effective lighting area of ??up to several hundred square feet. As night fell, neon flashing, Ambilight, exceptionally enchanting.
订阅:
评论 (Atom)











