Solar Outdoor Lights

Solar Light Manufacturers, Solar Lantern Manufacturers, Solar Lights China

7.2.1.1 miniaturization
Thick-film hybrid integrated circuits based on ceramics as a circuit substrate, the conductor and resistor network components by screen printing technology, printed on the surface of the substrate; the use of a particular technology, the other master (is) moving devices (such as blocks, diodes, transistors, capacitors, 22) mounted on a ceramic substrate; and then connected to the output pin, and packaging operations to form a fully functional, high security applications IC. PV controller Houmodianlu is to use thick-film hybrid integrated circuit technology, the resistor printed on the ceramic substrate, and the use of chip technology, greatly reduced the volume under the same power conditions, the volume of ordinary PV controller 1 / 3. For the back of a small system can be placed directly in the solar cell is easy to use.
7.2.1.2 The modular design
Houmodianlu PV controller design uses fast mode, PV controller module Houmodianlu centered around the central module power module, timing module, overload, short circuit protection module. Customers according to their needs, the choice of different modules assembled in the form of building blocks for their own charge controller. Due to its modular design, greatly shorten the product development cycle for solar applications, for low-power charge and discharge requirements, you can use this module alone, if necessary increase the power, you can extend the power module. It also can be extended to other modules, such as timing module, overload, short circuit protection function.
7.2.1.3 featured
Houmodianlu PV controller has the following features:
1) The battery discharge protection;
2) automatic recovery discharge function;
3) Battery overcharge protection;
4) reverse charge (the battery charges the solar cell);
5) The temperature compensation function;
6) the automatic switch lamp function (load switched at night, daytime load cut);
7) trickle charge (battery charge protection point reached when using constant voltage, trickle charge).

Going to our website: www.cn-solargardenlights.com know more.